Wraparound Extension Drawings in Barking IG11
Fixed-fee, MCIAT-chartered wraparound extension drawings for Barking (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Barking (IG11) mixes a medieval abbey-and-town-centre core with Victorian, Edwardian and interwar housing, so extension and loft work here depends heavily on how close a property sits to the historic centre and the river.
Two conservation areas — Abbey and Barking Town Centre and Abbey Road Riverside — plus the borough-wide 2022 Article 4 on upward extensions mean we check the boundary and Article 4 position before advising permitted development versus a full application.
Planning in Barking (IG11): what to know before you apply
Rear extensions and loft conversions across suburban IG11 are often achievable, but the borough-wide 2022 Article 4 means any added-storey scheme needs planning permission, and properties inside the Abbey town-centre or Abbey Road Riverside conservation areas face tighter heritage control near the abbey and church.
Typical Barking housing stock
IG11 ranges from the historic Barking Abbey and town-centre core through Victorian and Edwardian terraces to interwar semis and later suburban housing spreading out from the town centre.
Streets we regularly draw for in Barking
Abbey Road · East Street · North Street · Linton Road
Wraparound Extension Drawings for Barking (IG11) homes: the package and the process
Every wraparound extension drawings we prepare for an Barking property is drawn to London Borough of Barking and Dagenham’s validation standards and tuned to the IG11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A wraparound extension is what happens when a rear extension and a side return are designed together rather than as two separate projects: the new build wraps around the back corner of the house, turning a galley kitchen and a small rear room into one continuous kitchen, dining and living space running the full width of the plot. It is the most ambitious single-storey option most London terraces and semi-detached houses have, and because it reshapes almost the entire ground floor, it needs careful structural and drainage planning as well as a confident planning application.
DrawingsDirect draws wraparound extensions for full planning and building regulations, with structural calculations for the L-shaped frame and any drainage diversion produced in-house by our MCIAT-chartered team, on a fixed fee. If your project is a single-storey rear addition or a side infill on its own, see our Rear Extension and Side Return Extension pages; if you also want a second storey, see Double Storey Extension Drawings.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Barking IG11 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for an extension in Barking & Dagenham?+
What does the council expect for an extension on the Becontree Estate?+
What does the borough-wide HMO Article 4 direction affect?+
How long does Barking & Dagenham Council take to decide?+
How much do planning drawings cost in Barking & Dagenham?+
Get your free Barking planning assessment
Tell us your Barking (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.