Side Return Extension Drawings in Surbiton KT6
Fixed-fee, MCIAT-chartered side return extension drawings for Surbiton (KT6) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
Surbiton (KT6) is a classic Victorian railway suburb whose Claremont Road conservation area preserves Thomas Pooley's 1830s 'New Town' laid out around the landscaped Claremont Crescent Gardens.
KT6 also includes the Southborough and Surbiton Town Centre conservation areas, and the Seething Wells Filter Beds off Portsmouth Road are covered by one of the borough's Article 4 directions.
Planning in Surbiton (KT6): what to know before you apply
Much of central Surbiton lies within the Claremont Road, Southborough or Surbiton Town Centre conservation areas, where Victorian villa frontages and rooflines are protected. Kingston publishes no Article 4 rows to the national register, so confirm on the council's Article 4 map before relying on any permitted-development right in KT6.
Typical Surbiton housing stock
Victorian villas and terraces from Surbiton's railway-era 'New Town', centred on the landscaped Claremont Crescent Gardens and stretching between Portsmouth Road and Maple Road, with grander detached houses in the Southborough conservation area to the south.
Streets we regularly draw for in Surbiton
Claremont Road · Maple Road · Anglesea Road · Southborough Road
Side Return Extension Drawings for Surbiton (KT6) homes: the package and the process
Every side return extension drawings we prepare for an Surbiton property is drawn to Royal Borough of Kingston upon Thames’s validation standards and tuned to the KT6 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.
DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings in Surbiton KT6 — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Surbiton planning assessment
Tell us your Surbiton (KT6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.