Side Return Extension Drawings in Richmond
Fixed-fee, MCIAT-chartered side return extension drawings for Richmond homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
Richmond upon Thames is one of London's most design-sensitive boroughs. A high proportion of its housing — Georgian and Victorian townhouses, Edwardian villas and riverside cottages — sits within conservation areas such as Richmond Green, Twickenham Riverside, Teddington, Kew Green and Barnes Green, and much of it lies within the Thames flood zone. Applications here succeed on the strength of careful, context-led drawings rather than standard templates, and permitted development cannot be assumed even for modest works.
The London Borough of Richmond upon Thames has some of the most extensive Article 4 coverage in London, with widespread directions removing permitted development rights across its conservation areas, plus basement and front-garden controls in parts of the borough. In practice that means alterations which would be automatic elsewhere — dormers, cladding, some rear works — need a full householder application here. Near the river in Twickenham, Richmond and Hampton, Thames flood-zone requirements apply, and protected views and river-frontage design control shape what is achievable, so we confirm the constraints for your exact address before drawing.
We prepare Richmond planning applications that respond to the borough's conservation and riverside setting, designing context-led drawings that reflect the period townscape and evidencing flood-risk and finished-floor-level considerations within the submission so the council can validate and approve without repeated revisions. The fee is fixed and agreed up front, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Richmond approves. Because so much turns on design detail, we prepare submissions to the validation checklist with the elevations and materials the council expects; conservation and riverside cases can attract additional consultation, but most householder applications are still determined within the statutory eight-week period, and our roughly seven-day drawing turnaround gets schemes moving quickly.
Planning in Richmond: what to know before you apply
Richmond has some of the most extensive Article 4 coverage in London, so permitted development cannot be assumed even for modest works — many conservation areas require a full application. Thames flood-zone considerations also apply near the river. We confirm the constraints for your exact address before drawing.
Typical Richmond housing stock
Georgian and Victorian townhouses, Edwardian villas and riverside cottages, many within conservation areas and close to the Thames.
Areas we regularly draw for in Richmond
Richmond · Twickenham · Teddington · Kew · Barnes · East Sheen · Hampton
Side Return Extension Drawings for Richmond homes: the package and the process
Every side return extension drawings we prepare for a Richmond property is drawn to London Borough of Richmond upon Thames’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Behind most London terraces sits a narrow side alley, a metre or so wide, running from the front boundary to the back garden. A side return extension builds into that alley at ground floor, pushing the kitchen wall out to line up with the rest of the house and topping the new space with a glazed or pitched roof — often the single biggest transformation available to a galley kitchen without touching the garden at all. Because the alley typically sits hard against next door's boundary wall, this is also the extension type most likely to involve your neighbour directly, both through the planning application and through the Party Wall process.
DrawingsDirect draws side return extensions for full planning, coordinates the Party Wall paperwork your neighbour will need to see, and produces the structural calculations for the beam that carries the new roof, all under one MCIAT-chartered team and one fixed fee. If you are also extending the rear at the same time, our Wraparound Extension page covers the combined project.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings across Richmond
Side Return Extension Drawings in Richmond — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free Richmond planning assessment
Tell us your Richmond address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.