Kitchen extension interior in a Bermondsey Street townhouse, Southwark SE1

Bermondsey · SE1 · Southwark

Planning Drawings in Bermondsey SE1

Fixed-fee, MCIAT-chartered planning drawings for Bermondsey (SE1) homeowners — London Borough of Southwark validation and local constraints handled from the start.

Bermondsey (SE1) is a dense pocket of Southwark where Georgian townhouses, former tanneries and warehouse conversions sit on a surviving medieval street grid — so homeowner work here leans toward loft conversions, roof terraces and shallow rear or side-return extensions that respect the narrow historic plots.

Most of the residential fabric lies within the Bermondsey Street or Tower Bridge Conservation Areas, where roof, front and rear alterations are judged against the historic townscape. We confirm which conservation-area boundary applies before advising whether your scheme is permitted development or needs a full householder application.

Proposed floor plan

Bermondsey SE1

Bermondsey (SE1) — planning at a glance

Council: London Borough of Southwark
Postcode district: SE1
Planning portal: View the Southwark planning portal
Housing stock: Georgian and early-Victorian townhouses and shop-houses line Bermondsey Street on a medieval plot pattern, interleaved with converted tanneries and warehouses. Narrow frontages, arched alleyways to rear yards and shallow back plots define what can be added.
Article 4: Southwark's Article 4 directions in this part of SE1 target use changes (borough-wide HMO controls and office-to-residential around Bermondsey), not householder extensions — a Bermondsey home project is governed by conservation-area rules rather than an Article 4.
Conservation: Bermondsey Street Conservation AreaTower Bridge Conservation Area
Sample streets: Bermondsey Street · Tanner Street · Morocco Street · Leathermarket Street
Local constraints: Bermondsey Street Conservation Area protects the medieval street pattern, narrow plots and warehouse detail, so front, roof and rear changes are closely assessedThe Tower Bridge Conservation Area covers the Shad Thames and riverside end of SE1, adding a second heritage frontage to checkTight terraced and shop-house plots with rear alleyways leave little back garden, constraining extension depth and daylight to neighbours

Planning in Bermondsey (SE1): what to know before you apply

Homes across this part of SE1 typically sit within the Bermondsey Street or Tower Bridge Conservation Areas, which curtail permitted-development rights and mean many roof and side changes need a householder application. Southwark's Article 4 directions here concern use changes rather than extensions, so the conservation-area appraisal is the main early check.

Typical Bermondsey housing stock

Georgian and early-Victorian townhouses and shop-houses line Bermondsey Street on a medieval plot pattern, interleaved with converted tanneries and warehouses. Narrow frontages, arched alleyways to rear yards and shallow back plots define what can be added.

Streets we regularly draw for in Bermondsey

Bermondsey Street · Tanner Street · Morocco Street · Leathermarket Street

Planning Drawings for Bermondsey (SE1) homes: the package and the process

Every planning drawings we prepare for an Bermondsey property is drawn to London Borough of Southwark’s validation standards and tuned to the SE1 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Planning drawings are the scale drawings a London council uses to judge your application: existing and proposed floor plans, elevations, sections and site plans that show the design, scale and neighbour impact of your project. DrawingsDirect produces complete, validation-ready planning drawing sets for extensions, lofts and conversions across London.

What is included in a planning drawing set?

A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.

Site location plan (1:1250) and block plan (1:500)
Existing floor plans, elevations and sections
Proposed floor plans, elevations and sections
Roof plans where relevant, with heights and materials annotated
A design and access or heritage statement where the borough requires one

How are planning drawings different from building regulations drawings?

Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.

What a London planning drawing set contains
Drawing	Typical scale	What it shows
Site location plan	1:1250	The property in its street context, site edged red
Block plan	1:500	The building's footprint and position in the plot
Floor plans (existing & proposed)	1:100 / 1:50	Room layout, walls, openings and the proposed changes
Elevations (existing & proposed)	1:100 / 1:50	Each face of the building and how it changes
Sections	1:100 / 1:50	A cut through showing heights, levels and roof form

Also in Bermondsey SE1

Planning Permission Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Planning Drawings across Southwark Planning Drawings across London

FAQ

Planning Drawings in Bermondsey SE1 — FAQs

What scale should London planning drawings be?+

Site location plans are 1:1250, block plans 1:500, and floor plans, elevations and sections are typically 1:100 or 1:50. We format every drawing to your specific borough's requirements.

Do I need an architect to produce planning drawings?+

No. MCIAT-chartered architectural technologists produce the same council-accepted planning drawings with the same professional accountability, and councils assess the drawings, not the author's job title.

How many revisions are included in the fee?+

All of them. The fee is fixed and we redraw free until your council approves — revisions requested by a planning officer never cost you extra.

Can you draw from my existing plans?+

We can work from existing measured drawings, but for accuracy we usually carry out a laser survey so the proposed set matches your property exactly.

Do planning drawings guarantee approval?+

No drawing can guarantee a decision, but drawing to the local plan and validation checklist maximises your odds — and we redraw free until approval.

Do I need planning permission for an extension in Southwark?+

It depends on the area. On Victorian terraces in Camberwell and Peckham a single-storey rear or side-return extension can fall within permitted development, but conservation areas across Camberwell, Dulwich, Bermondsey and Bankside remove or restrict those rights. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.

What is the Dulwich Estate scheme of management?+

It is a distinctive Southwark consideration: many properties on the Dulwich Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. It is separate from the council's decision, so both must be satisfied. We flag whether the Estate scheme applies to your property before drawing and design to its requirements as well as the council's.

Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+

Yes. Southwark's riverside quarters carry their own townscape and taller-building context, and conversions there are assessed against conservation and design control near the Thames. We prepare drawings that respond to that setting and the council's design expectations, confirming the constraints for your specific building before design begins.

How long does Southwark Council take to decide?+

Southwark determines most householder applications within the statutory eight-week period once validated; Dulwich, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Southwark?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Southwark approves. A Camberwell terrace extension and a Dulwich Estate application differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.

Free Fixed Quote

Get your free Bermondsey planning assessment

Tell us your Bermondsey (SE1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.