
Mansard Loft Conversion Drawings in Kenton HA3
Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Kenton (HA3) homeowners — London Borough of Harrow validation and local constraints handled from the start.
Kenton (HA3) is a 1930s semi-detached suburb straddling the Harrow–Brent border, where the everyday project is a rear kitchen extension, a hip-to-gable or L-shaped dormer loft, or a two-storey side extension that adds a bedroom while keeping the interwar frontage in proportion.
Around the Mount Stewart and Northwick Circle conservation areas we take extra care with roof form, materials and the building line, and we always confirm whether an address falls to Harrow Council so the application is validated first time.


Planning in Kenton (HA3): what to know before you apply
No published householder Article 4 direction, though the Mount Stewart and Northwick Circle conservation areas curb some permitted-development rights; the main watch-points are matching the semi-detached roofline and confirming the correct authority near the Harrow/Brent boundary.
Typical Kenton housing stock
Interwar semi-detached and short terraced houses laid out as a 1930s suburb straddling the Harrow and Brent border, typically with bay windows, hipped roofs and off-street parking. Plots are regular with modest-to-generous rear gardens well suited to single-storey additions.
Streets we regularly draw for in Kenton
The Ridgeway · Draycott Avenue · Windermere Avenue · Northwick Circle
Mansard Loft Conversion Drawings for Kenton (HA3) homes: the package and the process
Every mansard loft conversion drawings we prepare for an Kenton property is drawn to London Borough of Harrow’s validation standards and tuned to the HA3 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A mansard loft conversion replaces the existing rear roof slope with a new, steeply pitched structure that runs almost to the vertical, set behind a shallow flat section at the ridge. It is the most involved of the three main loft types because it is effectively a new roof, not an addition to the old one — but it also delivers the most usable floor area and headroom, and it is the type most London terraces were designed to carry in the first place.
DrawingsDirect draws mansards for period terraces across every London borough. Because a mansard alters the whole roof form, we treat the planning application as the main event — matching slate or tile colour, window rhythm and eaves detailing to the host building and its neighbours — while coordinating the structural design, Party Wall Act notices and building regulations drawings in parallel so nothing holds up the build once consent is granted.
What is a mansard loft conversion?
A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.
Does a mansard loft conversion need planning permission in London?
Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.
| Package | Scope | Planning route | Fee from |
|---|---|---|---|
| Rear mansard, planning only | Design, planning drawings and supporting statement | Householder planning | £1,600 |
| Rear mansard, planning and building regs | Planning drawings plus structural and Part L detailing | Householder planning | £2,200 |
| Front and rear mansard | Full roof rebuild on both slopes, with structural | Householder planning | £2,400 |
Mansard Loft Conversion Drawings in Kenton HA3 — FAQs
How much do mansard loft conversion drawings cost in London?+
Can a mansard ever be permitted development?+
How long do mansard drawings take?+
Will a mansard need scaffolding and affect the whole roof?+
Do you handle the party wall process as well as the drawings?+
Do I need planning permission for a loft conversion in Harrow?+
What does Harrow expect for a rear extension on a 1930s semi?+
Can I extend a home in Harrow on the Hill or Pinner?+
How long does Harrow Council take to decide?+
How much do planning drawings cost in Harrow?+
Get your free Kenton planning assessment
Tell us your Kenton (HA3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.