MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportMansard Loft Conversion Drawings in Battersea SW11

Rear extension onto a garden behind a 'between the commons' Battersea SW11 Victorian terrace in Wandsworth
Battersea · SW11 · Wandsworth

Mansard Loft Conversion Drawings in Battersea SW11

Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Battersea (SW11) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Free Battersea planning assessment

Tell us your Battersea (SW11) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Battersea (SW11) in Wandsworth runs from the prized 'between the commons' Victorian terraces near Clapham, through the shops of Lavender Hill and Northcote Road, down to the transformed Nine Elms riverside. On the terraced streets, side-return and rear extensions and loft conversions are the staple projects, and Wandsworth's design expectations for that consistent housing type are well documented.

Two conservation areas shape the district — Battersea Park around the park frontages, and the listed Shaftesbury Park Estate, a Victorian model-cottage estate where control over elevations and roofs is especially tight. We establish where a Battersea property sits relative to those boundaries, and the Thames flood zone near the river, before recommending a route and drawing to Wandsworth's residential guidance.

Rear extension onto a garden behind a 'between the commons' Battersea SW11 Victorian terrace in Wandsworth
Isometric illustration of a Battersea SW11 home mansard loft conversion drawings design
Proposed floor plan
Battersea SW11

Planning in Battersea (SW11): what to know before you apply

SW11 has no householder Article 4 direction, so many Battersea terraces retain permitted development rights — but the Shaftesbury Park Estate model-cottage conservation area is a significant exception with tight elevation control, and riverside plots toward Nine Elms sit within the Thames flood zone.

Typical Battersea housing stock

Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.

Streets we regularly draw for in Battersea

Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill

Mansard Loft Conversion Drawings for Battersea (SW11) homes: the package and the process

Every mansard loft conversion drawings we prepare for an Battersea property is drawn to London Borough of Wandsworth’s validation standards and tuned to the SW11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A mansard loft conversion replaces the existing rear roof slope with a new, steeply pitched structure that runs almost to the vertical, set behind a shallow flat section at the ridge. It is the most involved of the three main loft types because it is effectively a new roof, not an addition to the old one — but it also delivers the most usable floor area and headroom, and it is the type most London terraces were designed to carry in the first place.

DrawingsDirect draws mansards for period terraces across every London borough. Because a mansard alters the whole roof form, we treat the planning application as the main event — matching slate or tile colour, window rhythm and eaves detailing to the host building and its neighbours — while coordinating the structural design, Party Wall Act notices and building regulations drawings in parallel so nothing holds up the build once consent is granted.

What is a mansard loft conversion?

A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.

Does a mansard loft conversion need planning permission in London?

Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.

Typical mansard loft conversion drawing packages
PackageScopePlanning routeFee from
Rear mansard, planning onlyDesign, planning drawings and supporting statementHouseholder planning£1,600
Rear mansard, planning and building regsPlanning drawings plus structural and Part L detailingHouseholder planning£2,200
Front and rear mansardFull roof rebuild on both slopes, with structuralHouseholder planning£2,400
FAQ

Mansard Loft Conversion Drawings in Battersea SW11 — FAQs

How much do mansard loft conversion drawings cost in London?+
Planning drawings for a rear mansard typically start around £1,600. A combined planning and building regulations package, or a front-and-rear mansard, usually runs to around £2,200–£2,400 once structural calculations are included.
Can a mansard ever be permitted development?+
Rarely — because it changes the shape of the roof rather than adding within it, a mansard almost always exceeds permitted development tolerances. If you want to avoid a full application, ask us whether a dormer or hip-to-gable conversion would meet your space needs instead.
How long do mansard drawings take?+
A full planning drawing set is typically ready within about 10–14 days of survey, reflecting the extra design and consultation work a full roof rebuild involves. The statutory 8-week householder determination period then runs from validation.
Will a mansard need scaffolding and affect the whole roof?+
Yes — because the existing rear roof slope is removed and rebuilt, a mansard is a larger construction project than a dormer, and we design the sequencing and structural tie-ins with that in mind so your builder can programme the work efficiently.
Do you handle the party wall process as well as the drawings?+
We identify which neighbours require notice under the Party Wall etc. Act 1996 and provide the drawings needed to support the notice, so the party wall and planning processes can run in parallel rather than one waiting on the other.
Do I need planning permission for a side-return extension in Wandsworth?+
On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.
What does Wandsworth's basement Article 4 direction mean for me?+
In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.
How long will Wandsworth take to decide my application?+
Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.
Can you design an extension for a converted flat near the commons?+
Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.
How much do Wandsworth planning drawings cost?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.
Free Fixed Quote

Get your free Battersea planning assessment

Tell us your Battersea (SW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.