Arts-and-Crafts house extension in the John Innes estate, Merton Park SW19, designed for London Borough of Merton approval

Merton Park · SW19 · Merton

House Extension Drawings in Merton Park SW19

Fixed-fee, MCIAT-chartered house extension drawings for Merton Park (SW19) homeowners — London Borough of Merton validation and local constraints handled from the start.

Merton Park in SW19 is the John Innes estate, an early and carefully planned Arts-and-Crafts garden suburb within the London Borough of Merton. Its detached and semi-detached houses sit behind protected verges and hedges, so the typical projects are sensitively designed rear extensions, loft conversions and internal reworking rather than prominent frontage changes.

Because most of the estate lies within the John Innes conservation area, control over materials, roof forms, boundaries and even planting is unusually strong, and permitted-development rights are curtailed. We design in keeping with the estate's Arts-and-Crafts character and prepare the detailed, well-justified applications Merton's conservation officers require.

Proposed floor plan

Merton Park SW19

Merton Park (SW19) — planning at a glance

Council: London Borough of Merton
Postcode district: SW19
Planning portal: View the Merton planning portal
Housing stock: Merton Park is the John Innes garden suburb, an early planned Arts-and-Crafts estate of detached and semi-detached houses set behind protected verges, hedges and mature planting. The generous but tightly controlled plots mean sensitively designed rear extensions and loft conversions, rather than bold frontage changes, are the typical projects.
Article 4: London Borough of Merton does not publish its Article 4 directions to the national planning register, so permitted development rights in Merton Park (SW19) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The John Innes garden-suburb estate carries strong conservation control, with protected grass verges, hedges and boundary treatments shaping every alteration
Conservation: John Innes (Merton Park)John Innes (Wilton Crescent)Merton Hall Road
Sample streets: Mostyn Road · Gladstone Road · Cannon Hill Lane · Graham Road
Local constraints: The John Innes conservation area imposes strong control over elevations, materials, roofs and extensionsProtected grass verges, hedges and boundary walls are integral to the estate and cannot be altered freelyMature trees across the estate are frequently subject to TPOs affecting foundations and layoutOriginal Arts-and-Crafts detailing must be respected, limiting standard permitted-development-style additions

Planning in Merton Park (SW19): what to know before you apply

Merton Park sits largely within the John Innes conservation area, so while there is no separate published householder Article 4 direction we rely on, conservation status significantly reduces permitted-development rights and requires planning permission for most external changes. Protected verges, hedges and TPO trees further constrain extension footprints and boundary alterations.

Typical Merton Park housing stock

Merton Park is the John Innes garden suburb, an early planned Arts-and-Crafts estate of detached and semi-detached houses set behind protected verges, hedges and mature planting. The generous but tightly controlled plots mean sensitively designed rear extensions and loft conversions, rather than bold frontage changes, are the typical projects.

Streets we regularly draw for in Merton Park

Mostyn Road · Gladstone Road · Cannon Hill Lane · Graham Road

House Extension Drawings for Merton Park (SW19) homes: the package and the process

Every house extension drawings we prepare for an Merton Park property is drawn to London Borough of Merton’s validation standards and tuned to the SW19 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

A well-drawn extension adds space and value while sailing through the council; a poorly-drawn one triggers objections and refusals. DrawingsDirect draws rear, side-return, wraparound, double-storey and basement extensions for London homes — sized to your borough's tolerances, with daylight and neighbour impact considered before the planners raise them.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing.

Typical London extension drawing packages
Extension	Typical route	Package	Fee from
Single-storey rear	Permitted development / householder	Planning + building regs	£1,100
Side-return	Householder planning	Planning + building regs + structural	£1,600
Wraparound	Householder planning	Full package + structural	£2,200
Double-storey	Householder planning	Full package + structural	£2,400

Also in Merton Park SW19

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings across Merton House Extension Drawings across London

FAQ

House Extension Drawings in Merton Park SW19 — FAQs

How far can I extend without planning permission in London?+

Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.

Do extension drawings include structural calculations?+

Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.

How long do extension drawings take?+

Typically about 7 days from survey to a full drawing set delivered to your online portal.

Will my rear extension need a party wall agreement?+

If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.

Can I extend a house in a conservation area?+

Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.

Do I need planning permission for an extension in Merton?+

The interwar semis of Raynes Park and Morden often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.

What is special about building at the John Innes estate in Merton Park?+

The John Innes estate is a planned Arts-and-Crafts conservation area with a distinctive character the council protects closely — materials, proportions and rooflines are all controlled. Permitted development is often restricted there, so we design to the estate's character and prepare a full, context-led application, which is the reliable route to approval.

What do Merton's HMO Article 4 directions affect?+

In designated wards, an Article 4 direction removes permitted development for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but if you are considering an HMO we confirm whether the direction covers your address and use before advising.

How long does Merton Council take to decide?+

Merton determines most householder applications within the statutory eight-week period once validated; Wimbledon and Merton Park conservation cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Merton?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Merton approves. A suburban Raynes Park extension and a Wimbledon Village or Merton Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.

Free Fixed Quote

Get your free Merton Park planning assessment

Tell us your Merton Park (SW19) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.