MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHip-to-Gable Loft Conversion Drawings in Fulham SW6

Basement conversion office space beneath a Fulham SW6 Victorian terrace in Hammersmith & Fulham
Fulham · SW6 · Hammersmith & Fulham

Hip-to-Gable Loft Conversion Drawings in Fulham SW6

Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Fulham (SW6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Fulham planning assessment

Tell us your Fulham (SW6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Fulham (SW6) is one of west London's most consistent late-Victorian terraced neighbourhoods, and rear, side-return and basement projects dominate the workload. Several conservation areas — Parson's Green, Walham Green and Studdridge Street among them — cover large parts of the district, so whether a property sits inside one of those boundaries is the first thing that shapes an extension or loft scheme.

Basements are a defining Fulham project, and Hammersmith & Fulham applies a specific basement development policy controlling depth, structural method and impact on neighbours and trees. We confirm the conservation position and the basement-policy requirements before drawing, and prepare the application and structural drawings to the council's validation and design standards.

Basement conversion office space beneath a Fulham SW6 Victorian terrace in Hammersmith & Fulham
Isometric illustration of a Fulham SW6 home hip-to-gable loft conversion drawings design
Proposed floor plan
Fulham SW6

Planning in Fulham (SW6): what to know before you apply

SW6 has no householder Article 4 direction affecting typical rear or loft work, but its conservation areas mean permitted development cannot be assumed across much of Fulham, and Hammersmith & Fulham's basement development policy adds a further layer of control for the deep basements common here — both are checked at the outset.

Typical Fulham housing stock

Dense late-Victorian terraces across the Fulham 'streets' — the Peterborough Estate 'Lion houses' and the alphabet roads off New Kings Road — plus Edwardian mansion blocks around Parsons Green and newer riverside development toward the Thames.

Streets we regularly draw for in Fulham

Fulham Road · New Kings Road · Wandsworth Bridge Road · Munster Road

Hip-to-Gable Loft Conversion Drawings for Fulham (SW6) homes: the package and the process

Every hip-to-gable loft conversion drawings we prepare for an Fulham property is drawn to London Borough of Hammersmith & Fulham’s validation standards and tuned to the SW6 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Many London semi-detached and end-of-terrace houses, particularly the inter-war suburban stock that rings much of the city, were built with a hipped roof — sloped on all sides rather than finished with a flat gable end. That side slope wastes usable loft volume, and a hip-to-gable conversion reclaims it by extending the sloping hip out to a full vertical gable wall, squaring off the roof and opening up far more headroom along that side of the loft than the original roof shape allowed.

DrawingsDirect draws hip-to-gable conversions across outer and suburban London every week, usually alongside a rear dormer to maximise headroom over the stairwell. Because the hip-to-gable route is frequently permitted development, we check your eligibility first — and where a dormer, a mansard or a combination would use your roof better, we say so before you commit to a design. Every drawing set is produced by MCIAT-chartered architectural technologists, with structural calculations for the new gable wall coordinated in-house rather than farmed out to a separate engineer.

What is a hip-to-gable loft conversion?

A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.

  • Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
  • Squares off the roof by rebuilding the sloping hip as a vertical gable wall
  • Leaves the front and rear roof slopes untouched

Is a hip-to-gable loft conversion permitted development?

Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.

Typical hip-to-gable loft conversion drawing packages
ConversionTypical routeStructural scopeFee from
Hip-to-gable onlyPermitted development / LDCNew gable wall and rafter tie-in£1,300
Hip-to-gable plus rear dormerPermitted development / LDC where eligibleGable wall plus dormer structure£1,450
Hip-to-gable in a conservation areaHouseholder planningNew gable wall and rafter tie-in£1,600
FAQ

Hip-to-Gable Loft Conversion Drawings in Fulham SW6 — FAQs

How much do hip-to-gable loft conversion drawings cost in London?+
A hip-to-gable conversion on its own typically starts around £1,300. Combining it with a rear dormer usually costs a little more, around £1,450, to cover the additional structural design — we confirm the fixed fee once we have surveyed your roof.
Will my semi-detached house qualify for permitted development?+
Often, but it depends on the volume already used, whether the property sits in a conservation area or under an Article 4 direction, and whether previous extensions have already used up the allowance. We check this free before recommending a route.
How long do hip-to-gable drawings take?+
Typically around 7 days from survey to a full drawing set in your online portal, whether the route is a Lawful Development Certificate or full planning.
Do I need an architect for a hip-to-gable conversion?+
No — as MCIAT-chartered architectural technologists we produce the same council-accepted drawings, with structural calculations coordinated in-house, typically at a lower fee than an architecture practice.
What building regulations apply to a hip-to-gable loft?+
The same core requirements as any loft conversion: a protected stairway or upgraded fire doors, a compliant means-of-escape window, structural calculations for the new gable wall and floor, and insulation upgraded to current Part L standards. We coordinate all of this alongside the planning or Lawful Development Certificate drawings.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Fulham planning assessment

Tell us your Fulham (SW6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.