MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Flat Conversion Drawings in Putney SW15

Open-plan kitchen extension interior in a Putney SW15 Victorian house near the Thames, Wandsworth
Putney · SW15 · Wandsworth

Flat Conversion Drawings in Putney SW15

Fixed-fee, MCIAT-chartered flat conversion drawings for Putney (SW15) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Free Putney planning assessment

Tell us your Putney (SW15) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Putney (SW15) is unusually heavily conservation-controlled for an outer-inner London neighbourhood: five separate conservation areas — Putney Embankment, West Putney, East Putney, Charlwood Road & Lifford Street, and Oxford Road — cover a large share of the housing. Whether a property sits inside one of those boundaries is the single biggest factor in how an extension or loft is designed and assessed.

Add the Thames on the northern edge, and riverside and Embankment properties also carry flood-zone considerations that have to be addressed in the application. We map a Putney property against the conservation and flood-zone boundaries first, then design the drawings to Wandsworth's residential guidance so the application is validated without a query.

Open-plan kitchen extension interior in a Putney SW15 Victorian house near the Thames, Wandsworth
Isometric illustration of a Putney SW15 home flat conversion drawings design
Proposed floor plan
Putney SW15

Planning in Putney (SW15): what to know before you apply

SW15 has no householder Article 4 direction, but its five conservation areas mean permitted development cannot be assumed across much of Putney, and riverside properties near the Embankment sit within the Thames flood zone — both are checked before we recommend a route.

Typical Putney housing stock

Victorian and Edwardian terraces on the streets climbing from the river, riverside mansion blocks along the Embankment, and interwar semi-detached houses toward Putney Heath and Roehampton.

Streets we regularly draw for in Putney

Putney High Street · Upper Richmond Road · Lower Richmond Road · Disraeli Road

Flat Conversion Drawings for Putney (SW15) homes: the package and the process

Every flat conversion drawings we prepare for an Putney property is drawn to London Borough of Wandsworth’s validation standards and tuned to the SW15 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
ConversionTypical scopeRouteFee from
House to two self-contained flatsVertical split, separate or shared entranceFull planning plus building regulations£1,600
House to three or more flatsMultiple units, fire strategy requiredFull planning plus building regs plus structural£2,400
Flat conversion with a side or rear extensionAdditional floor area added to create compliant unitsFull planning plus structural calculations£2,800

Also in Putney SW15

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsFlat Conversion Drawings across WandsworthFlat Conversion Drawings across London
FAQ

Flat Conversion Drawings in Putney SW15 — FAQs

Do I need planning permission to convert a house into flats?+
Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.
How much do flat conversion drawings cost in London?+
Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.
What sound insulation is required between flats?+
Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.
Does each flat need a separate fire escape?+
Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.
What is the minimum size for a flat in London?+
London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.
Do I need planning permission for a side-return extension in Wandsworth?+
On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.
What does Wandsworth's basement Article 4 direction mean for me?+
In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.
How long will Wandsworth take to decide my application?+
Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.
Can you design an extension for a converted flat near the commons?+
Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.
How much do Wandsworth planning drawings cost?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.
Free Fixed Quote

Get your free Putney planning assessment

Tell us your Putney (SW15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.