MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportFlat Conversion Drawings in Paddington W2

Flat conversion drawings for a stucco-fronted terrace in Paddington W2, City of Westminster
Paddington · W2 · Westminster

Flat Conversion Drawings in Paddington W2

Fixed-fee, MCIAT-chartered flat conversion drawings for Paddington (W2) homeowners — Westminster City Council validation and local constraints handled from the start.

Free Paddington planning assessment

Tell us your Paddington (W2) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Paddington (W2) in Westminster is dominated by wide stucco-fronted terraces that were built as single family houses and subdivided into flats generations ago. The Bayswater and Queensway conservation areas protect those uniform painted frontages, while the Hallfield Estate conservation area protects something quite different — a post-war modernist estate whose original design is the reason for the designation.

Two Article 4 directions shape most W2 projects. Westminster has removed permitted development rights for basement development, so the lower-ground excavations that are common under these tall terraces need a full planning application from the outset. The Class E to C3 direction in the Central Activities Zone does the same for commercial-to-residential conversion. Because so much of W2 is flats within those subdivided terraces, tenure usually matters as much as designation: flats carry no permitted development rights at all, so freeholder consent runs alongside the application. We confirm the tenure, the Article 4 position and which conservation area an address sits in before drawing to Westminster's guidance.

Flat conversion drawings for a stucco-fronted terrace in Paddington W2, City of Westminster
Isometric illustration of a Paddington W2 home flat conversion drawings design
Proposed floor plan
Paddington W2

Planning in Paddington (W2): what to know before you apply

W2 is covered by Westminster's Article 4 direction removing permitted development rights for basement development, so lower-ground excavation needs a full planning application. The Class E to C3 direction applies in the Central Activities Zone, removing the right to convert commercial floorspace to residential without permission. Three conservation areas apply — Bayswater, Queensway and the Hallfield Estate — the first two protecting stucco frontages and the third a post-war modernist scheme. Much of the district's stock is flats within subdivided terraces, which have no permitted development rights regardless of designation.

Typical Paddington housing stock

Wide stucco-fronted terraces built as single houses around Bayswater and Queensway and long since subdivided into flats, alongside the Hallfield Estate — a listed post-war modernist scheme that is protected as a conservation area in its own right.

Streets we regularly draw for in Paddington

Praed Street · Sussex Gardens · Westbourne Terrace · Craven Road

Flat Conversion Drawings for Paddington (W2) homes: the package and the process

Every flat conversion drawings we prepare for an Paddington property is drawn to Westminster City Council’s validation standards and tuned to the W2 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
ConversionTypical scopeRouteFee from
House to two self-contained flatsVertical split, separate or shared entranceFull planning plus building regulations£1,600
House to three or more flatsMultiple units, fire strategy requiredFull planning plus building regs plus structural£2,400
Flat conversion with a side or rear extensionAdditional floor area added to create compliant unitsFull planning plus structural calculations£2,800
FAQ

Flat Conversion Drawings in Paddington W2 — FAQs

Do I need planning permission to convert a house into flats?+
Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.
How much do flat conversion drawings cost in London?+
Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.
What sound insulation is required between flats?+
Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.
Does each flat need a separate fire escape?+
Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.
What is the minimum size for a flat in London?+
London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.
Do I need planning permission for works in Westminster?+
Almost always. The great majority of Westminster falls within a conservation area and a high proportion of buildings are listed, so a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development rarely applies. We screen conservation, listing and lease constraints for your address before recommending a route.
I live in a mansion block — what extra consent might I need?+
Much of Westminster's stock is mansion-block or garden-square terrace, and the lease frequently requires the freeholder's consent alongside planning for external alterations. We confirm the lease position early and design a scheme that satisfies both the freeholder and the council, since either can block an otherwise sound proposal.
Will I need a Basement Impact Assessment in Westminster?+
Usually, for below-ground works. The City Plan basement policy requires a basement impact assessment and limits scale. If you are considering a basement or lower-ground extension we flag the requirement early and coordinate the structural and drainage input so the application is complete when submitted.
How long does Westminster City Council take to decide?+
Westminster determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the council's exacting validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Westminster?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led, listed-building and basement schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Paddington planning assessment

Tell us your Paddington (W2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.