MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportFlat Conversion Drawings in North Kensington W10

Flat conversion drawings for a Victorian terrace in North Kensington W10, Royal Borough of Kensington and Chelsea
North Kensington · W10 · Kensington & Chelsea

Flat Conversion Drawings in North Kensington W10

Fixed-fee, MCIAT-chartered flat conversion drawings for North Kensington (W10) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

Free North Kensington planning assessment

Tell us your North Kensington (W10) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

North Kensington (W10) in Kensington and Chelsea is a district of two halves. The Oxford Gardens conservation area covers a grid of late-Victorian terraces — some still whole houses, many subdivided into flats — while substantial post-war estates make up much of the rest, and Kensal Green Cemetery's landscape conservation area forms the northern edge.

Kensington and Chelsea layers its Article 4 directions more tightly than most boroughs, and two of them decide the shape of a typical W10 job. One covers basements, so the lower-ground excavation that is the borough's signature project needs a full planning application rather than permitted development. The other covers minor alterations in conservation areas including works to windows — which means something as modest as replacing windows on an Oxford Gardens frontage needs permission. A third removes permitted development rights for commercial to residential conversion. We establish which directions bite on an address, and whether it is a house or a flat, before drawing to the borough's guidance.

Flat conversion drawings for a Victorian terrace in North Kensington W10, Royal Borough of Kensington and Chelsea
Isometric illustration of a North Kensington W10 home flat conversion drawings design
Proposed floor plan
North Kensington W10

Planning in North Kensington (W10): what to know before you apply

W10 is covered by several Kensington and Chelsea Article 4 directions. One removes permitted development rights for basements, so excavation needs a full planning application. Another covers minor alterations in conservation areas including works to windows, so even window replacement on a protected frontage needs permission. A third removes permitted development rights for commercial to residential conversion. Two conservation areas apply — Oxford Gardens, covering the late-Victorian terrace grid, and Kensal Green Cemetery, protecting the landscape setting. Substantial parts of the district are post-war estate flats, which carry no permitted development rights at all.

Typical North Kensington housing stock

Late-Victorian terraces on the Oxford Gardens grid, a mix of whole houses and subdivided flats, set alongside substantial post-war estates and the open landscape of Kensal Green Cemetery to the north.

Streets we regularly draw for in North Kensington

Ladbroke Grove · Golborne Road · Oxford Gardens · St Quintin Avenue

Flat Conversion Drawings for North Kensington (W10) homes: the package and the process

Every flat conversion drawings we prepare for an North Kensington property is drawn to Royal Borough of Kensington and Chelsea’s validation standards and tuned to the W10 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
ConversionTypical scopeRouteFee from
House to two self-contained flatsVertical split, separate or shared entranceFull planning plus building regulations£1,600
House to three or more flatsMultiple units, fire strategy requiredFull planning plus building regs plus structural£2,400
Flat conversion with a side or rear extensionAdditional floor area added to create compliant unitsFull planning plus structural calculations£2,800
FAQ

Flat Conversion Drawings in North Kensington W10 — FAQs

Do I need planning permission to convert a house into flats?+
Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.
How much do flat conversion drawings cost in London?+
Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.
What sound insulation is required between flats?+
Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.
Does each flat need a separate fire escape?+
Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.
What is the minimum size for a flat in London?+
London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.
Do I need planning permission for works in Kensington & Chelsea?+
Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.
Can I build a basement in Kensington & Chelsea?+
Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.
My home is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.
How long does the Royal Borough take to decide?+
The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Kensington & Chelsea?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free North Kensington planning assessment

Tell us your North Kensington (W10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.