MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportFlat Conversion Drawings in Golders Green NW11

Rear extension drawings for an interwar semi in Golders Green NW11, London Borough of Barnet
Golders Green · NW11 · Barnet

Flat Conversion Drawings in Golders Green NW11

Fixed-fee, MCIAT-chartered flat conversion drawings for Golders Green (NW11) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Free Golders Green planning assessment

Tell us your Golders Green (NW11) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Golders Green (NW11) contains two very different designations. The Golders Green conservation area covers the Edwardian and interwar core around Golders Green Road and Hoop Lane. To the north-east lies Hampstead Garden Suburb — a planned Arts and Crafts estate that is one of the most tightly controlled residential environments in London, and Barnet has an Article 4 direction covering it.

That Article 4 direction is the single most important fact for anyone building in the Suburb: it removes permitted development rights across the conservation area, so even modest external work needs a full planning application. Because the Suburb was designed as a complete composition, the controls extend past the buildings to the hedge lines, materials and rooflines that make up the original scheme — a level of detail most London conservation areas do not reach. Barnet's separate HMO Article 4 direction removes the permitted change to small houses in multiple occupation across the district. We establish whether an NW11 address is inside the Suburb boundary before drawing to Barnet's guidance, because the answer changes the entire route to consent.

Rear extension drawings for an interwar semi in Golders Green NW11, London Borough of Barnet
Isometric illustration of a Golders Green NW11 home flat conversion drawings design
Proposed floor plan
Golders Green NW11

Planning in Golders Green (NW11): what to know before you apply

NW11 spans two conservation areas with very different regimes. Hampstead Garden Suburb is covered by a Barnet Article 4 direction removing permitted development rights across the Suburb, so even modest external alterations need a full planning application, and because the Suburb is a planned Arts and Crafts composition the controls extend to hedge lines, materials and rooflines as part of the original design. The Golders Green conservation area controls the Edwardian and interwar core around Golders Green Road. Barnet's HMO Article 4 direction also removes the permitted change to small houses in multiple occupation across the district.

Typical Golders Green housing stock

Edwardian and interwar semi-detached and detached houses around Golders Green Road and Hoop Lane, and the planned Arts and Crafts housing of Hampstead Garden Suburb toward Temple Fortune.

Streets we regularly draw for in Golders Green

Golders Green Road · Finchley Road · Hoop Lane · Temple Fortune Lane

Flat Conversion Drawings for Golders Green (NW11) homes: the package and the process

Every flat conversion drawings we prepare for an Golders Green property is drawn to London Borough of Barnet’s validation standards and tuned to the NW11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
ConversionTypical scopeRouteFee from
House to two self-contained flatsVertical split, separate or shared entranceFull planning plus building regulations£1,600
House to three or more flatsMultiple units, fire strategy requiredFull planning plus building regs plus structural£2,400
Flat conversion with a side or rear extensionAdditional floor area added to create compliant unitsFull planning plus structural calculations£2,800
FAQ

Flat Conversion Drawings in Golders Green NW11 — FAQs

Do I need planning permission to convert a house into flats?+
Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.
How much do flat conversion drawings cost in London?+
Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.
What sound insulation is required between flats?+
Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.
Does each flat need a separate fire escape?+
Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.
What is the minimum size for a flat in London?+
London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.
Do I need planning permission for a loft or extension in Barnet?+
Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.
What is different about building in Hampstead Garden Suburb?+
The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.
How long does Barnet take to decide an application?+
Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.
How much do Barnet planning drawings cost?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.
Free Fixed Quote

Get your free Golders Green planning assessment

Tell us your Golders Green (NW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.