Flat Conversion Drawings in East Sheen SW14
Fixed-fee, MCIAT-chartered flat conversion drawings for East Sheen (SW14) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
East Sheen (SW14) in Richmond is a predominantly Edwardian and interwar suburb running from the shops on Upper Richmond Road West down to old Mortlake by the river. Its conservation areas — East Sheen Avenue, Mortlake Green and Sheen Lane — protect the planned street layouts and the historic Mortlake core, so an extension or loft near those boundaries is assessed against their established character.
The neighbourhood sits against Richmond Park, whose protected setting and views influence the scale and roof form acceptable on nearby plots, while the Mortlake riverside carries Thames flood-zone considerations. We confirm the conservation, park-setting and flood-zone position of a Sheen property before drawing, and prepare the application to Richmond's residential design and validation standards.
Planning in East Sheen (SW14): what to know before you apply
SW14 has no householder Article 4 direction, so many East Sheen houses retain permitted development rights — but the three conservation areas, the Richmond Park setting and the Mortlake riverside flood zone are each checked before we recommend a route.
Typical East Sheen housing stock
Edwardian and interwar semi-detached and terraced houses across East Sheen, the planned tree-lined layout of East Sheen Avenue, and older Victorian cottages around Mortlake Green and the former brewery.
Streets we regularly draw for in East Sheen
Upper Richmond Road West · Sheen Lane · East Sheen Avenue · Mortlake High Street
Flat Conversion Drawings for East Sheen (SW14) homes: the package and the process
Every flat conversion drawings we prepare for an East Sheen property is drawn to London Borough of Richmond upon Thames’s validation standards and tuned to the SW14 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.
DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.
Do I need planning permission to convert a house into flats?
Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.
Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.
What sound insulation is required between flats?
Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.
| Conversion | Typical scope | Route | Fee from |
|---|---|---|---|
| House to two self-contained flats | Vertical split, separate or shared entrance | Full planning plus building regulations | £1,600 |
| House to three or more flats | Multiple units, fire strategy required | Full planning plus building regs plus structural | £2,400 |
| Flat conversion with a side or rear extension | Additional floor area added to create compliant units | Full planning plus structural calculations | £2,800 |
Flat Conversion Drawings in East Sheen SW14 — FAQs
Do I need planning permission to convert a house into flats?+
How much do flat conversion drawings cost in London?+
What sound insulation is required between flats?+
Does each flat need a separate fire escape?+
What is the minimum size for a flat in London?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free East Sheen planning assessment
Tell us your East Sheen (SW14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.