Rear extension onto a garden behind a 'between the commons' Battersea SW11 Victorian terrace in Wandsworth

Battersea · SW11 · Wandsworth

Flat Conversion Drawings in Battersea SW11

Fixed-fee, MCIAT-chartered flat conversion drawings for Battersea (SW11) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.

Battersea (SW11) in Wandsworth runs from the prized 'between the commons' Victorian terraces near Clapham, through the shops of Lavender Hill and Northcote Road, down to the transformed Nine Elms riverside. On the terraced streets, side-return and rear extensions and loft conversions are the staple projects, and Wandsworth's design expectations for that consistent housing type are well documented.

Two conservation areas shape the district — Battersea Park around the park frontages, and the listed Shaftesbury Park Estate, a Victorian model-cottage estate where control over elevations and roofs is especially tight. We establish where a Battersea property sits relative to those boundaries, and the Thames flood zone near the river, before recommending a route and drawing to Wandsworth's residential guidance.

Proposed floor plan

Battersea SW11

Battersea (SW11) — planning at a glance

Council: London Borough of Wandsworth
Postcode district: SW11
Planning portal: View the Wandsworth planning portal
Housing stock: Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.
Article 4: London Borough of Wandsworth does not publish its Article 4 directions to the national planning register, so permitted development rights in Battersea (SW11) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The Battersea Park and Shaftesbury Park Estate conservation areas and the Nine Elms riverside context are the main controls.
Conservation: Battersea ParkShaftesbury Park Estate
Sample streets: Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill
Local constraints: Battersea Park and Shaftesbury Park Estate conservation areas — the latter a protected Victorian model estate with tight control over elevations and rooflinesThe desirable 'between the commons' terraces, where Wandsworth's rear and side-return depth expectations are well establishedThames riverside flood-zone and tall-building context around the Nine Elms regeneration area

Planning in Battersea (SW11): what to know before you apply

SW11 has no householder Article 4 direction, so many Battersea terraces retain permitted development rights — but the Shaftesbury Park Estate model-cottage conservation area is a significant exception with tight elevation control, and riverside plots toward Nine Elms sit within the Thames flood zone.

Typical Battersea housing stock

Victorian terraces on the sought-after 'between the commons' streets and around Lavender Hill and Northcote Road, the listed Shaftesbury Park Estate model cottages, mansion flats facing Battersea Park, and new riverside apartments toward Nine Elms.

Streets we regularly draw for in Battersea

Lavender Hill · Northcote Road · Battersea Park Road · St John's Hill

Flat Conversion Drawings for Battersea (SW11) homes: the package and the process

Every flat conversion drawings we prepare for an Battersea property is drawn to London Borough of Wandsworth’s validation standards and tuned to the SW11 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.

Converting a house into flats is one of the few residential projects in London that always needs planning permission, whatever the size of the property or the number of units created. Splitting a single dwelling into two or more self-contained homes is treated as development regardless of whether any external work is proposed, because the change affects how the building is used and how many households occupy it.

DrawingsDirect draws house-to-flats conversions from the first survey through to a submission-ready planning and building-regulations package. Sound insulation between units, separate escape routes, individual services and London's minimum space standards are designed in from the layout stage, not retrofitted once the council asks for them — which is a large part of why our schemes are approved first time.

Do I need planning permission to convert a house into flats?

Yes, always. Converting a single dwelling into two or more self-contained flats is a change from one home to several, and that subdivision is treated as development requiring a full planning application — there is no permitted development route that allows it, regardless of the property's size or whether the exterior changes at all. The application has to demonstrate that each flat meets space, layout, amenity and parking standards in its own right, not just that the building as a whole is being used sensibly.

Boroughs also weigh the loss of a family-sized house against their local housing policy, since converting a larger house into several flats reduces the stock of homes suited to families even as it adds smaller units. We take that policy context into account when advising on layout and unit numbers, rather than simply maximising the number of flats the floor area could technically support.

What sound insulation is required between flats?

Part E of the building regulations sets minimum sound insulation standards for the walls and floors separating flats, covering both airborne and impact sound. Where an existing house is subdivided, the drawings specify how the party floors and walls between units will be upgraded — additional layers, resilient bars, or a floating floor — and pre-completion sound testing is normally required before the flats can be signed off. Getting this detail right on the drawings from the outset matters, because retrofitting sound insulation after a failed test usually means taking up a finished floor or ceiling that has already been decorated.

House-to-flats conversion drawing packages in London
Conversion	Typical scope	Route	Fee from
House to two self-contained flats	Vertical split, separate or shared entrance	Full planning plus building regulations	£1,600
House to three or more flats	Multiple units, fire strategy required	Full planning plus building regs plus structural	£2,400
Flat conversion with a side or rear extension	Additional floor area added to create compliant units	Full planning plus structural calculations	£2,800

Also in Battersea SW11

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Flat Conversion Drawings across Wandsworth Flat Conversion Drawings across London

FAQ

Flat Conversion Drawings in Battersea SW11 — FAQs

Do I need planning permission to convert a house into flats?+

Yes, always. Subdividing a single dwelling into two or more self-contained flats is treated as development in its own right, so a full planning application is required regardless of whether the exterior of the building changes.

How much do flat conversion drawings cost in London?+

Packages start from £1,600 for converting a house into two flats and rise to around £2,800 where three or more units, structural work or an extension are involved. We agree a fixed fee once we know the scope.

What sound insulation is required between flats?+

Part E of the building regulations sets minimum airborne and impact sound standards for the floors and walls separating flats, and pre-completion sound testing is normally required before the units can be signed off.

Does each flat need a separate fire escape?+

Each flat needs its own means of escape and the building needs to be fire-compartmented between units, using fire-rated floors, walls and doors and either a protected shared stairway or separate final exits.

What is the minimum size for a flat in London?+

London applies minimum internal floor areas based on bedroom and occupancy numbers, adopted from the national space standards through the London Plan. We check every proposed flat against the relevant threshold before drawing the layout.

Do I need planning permission for a side-return extension in Wandsworth?+

On many of Wandsworth's Victorian terraces a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Wandsworth Common and Nightingale Lane, and the 'between the commons' streets, can restrict this. We check your street's designation first and can secure a Lawful Development Certificate where the work is permitted development.

What does Wandsworth's basement Article 4 direction mean for me?+

In parts of Wandsworth an Article 4 direction removes permitted development for basement works, and the council requires a Basement Impact Assessment covering structural stability, drainage and groundwater. If you are considering a basement or lower-ground extension we flag whether the direction applies to your address early, and coordinate the structural input so the application is complete when submitted.

How long will Wandsworth take to decide my application?+

Wandsworth determines most householder applications within the statutory eight-week window once the submission is validated. Because the terraced grids around the commons are party-wall-sensitive and design expectations are well established, the commonest delay is a drawing query — so we prepare Wandsworth submissions to the validation checklist to keep them moving.

Can you design an extension for a converted flat near the commons?+

Yes. Much of Battersea and the streets around Clapham and Wandsworth Commons are mansion blocks and converted flats, where ownership, lease and party-wall considerations shape what is deliverable alongside the planning route. We confirm the ownership and structural context before drawing, and coordinate the calculations in-house so party-wall-sensitive schemes are handled cleanly.

How much do Wandsworth planning drawings cost?+

We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Wandsworth approves. The price depends on the scheme — a side-return differs from a mansard loft or a basement — so we quote once we have seen your project rather than charging by the hour.

Free Fixed Quote

Get your free Battersea planning assessment

Tell us your Battersea (SW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.