Double Storey Extension Drawings in Tower Hamlets
Fixed-fee, MCIAT-chartered double storey extension drawings for Tower Hamlets homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.
Tower Hamlets runs from the listed Georgian terraces of Spitalfields and the warehouse and wharf conversions of Wapping and Limehouse through the Victorian streets of Bow and Mile End to the dense purpose-built and estate housing of Bethnal Green, Poplar and Whitechapel and the towers of the Isle of Dogs. It is one of London's most heritage-dense and design-scrutinised boroughs, so the right route for an alteration or extension depends heavily on the building type and its conservation or listing status.
A high proportion of streets fall within conservation areas — Fournier Street and Elder Street in Spitalfields, Wapping Pierhead, Narrow Street in Limehouse, Victoria Park, Tredegar Square in Bow and Whitechapel Market — where permitted development is removed and even some changes of use are controlled. Spitalfields in particular carries a high density of listed Georgian terraces, where listed-building consent is usually required for many alterations, internal as well as external. Tower Hamlets also applies Article 4 directions removing permitted development for HMO conversions in parts of the borough, Thames-side flood-zone considerations run along the Wapping and Limehouse riverside, and tall-building and townscape context near the City fringe and Canary Wharf adds further design scrutiny.
We prepare Tower Hamlets planning and, where needed, listed-building submissions to the council's validation and design standards, screening conservation-area and listing constraints for your exact address before recommending a route to consent. Because the borough determines most householder applications within the statutory eight-week period once validated, we work validation-first to avoid the queries that cause most delays. The fee is fixed and agreed up front, drawings typically follow within about seven days, and we offer free redraws until the council approves — the same council-accepted drawings an architect would produce, usually at around 30% less.
Planning in Tower Hamlets: what to know before you apply
Tower Hamlets applies Article 4 directions to HMO conversions in parts of the borough and removes permitted development across its many conservation areas — Spitalfields, Wapping Pierhead and Tredegar Square among them. Spitalfields in particular carries a high density of listed Georgian terraces where listed-building consent is usually required. Thames flood-zone considerations apply along the riverside. We confirm the constraints for your address before drawing.
Typical Tower Hamlets housing stock
Georgian terraces around Spitalfields, warehouse and wharf conversions along the Wapping and Limehouse riverside, Victorian terraces across Bow and Mile End, and dense purpose-built and estate housing throughout the borough.
Areas we regularly draw for in Tower Hamlets
Bethnal Green · Bow · Poplar · Whitechapel · Wapping · Limehouse · Mile End · Isle of Dogs
Double Storey Extension Drawings for Tower Hamlets homes: the package and the process
Every double storey extension drawings we prepare for a Tower Hamlets property is drawn to London Borough of Tower Hamlets’s validation standards and tuned to the local constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A double storey extension builds a second floor above a single-storey side or rear addition, typically adding a bedroom and bathroom upstairs over a widened kitchen or reception room below. Because the foundations and roof of a single-storey extension already carry most of the fixed cost of building, adding a floor on top is often the most cost-effective way to gain two rooms rather than two separate projects. The trade-off is scrutiny: a two-storey addition sits closer to eye level with neighbouring windows and gardens, so councils examine massing, roofline and boundary distance more closely than they would a single-storey extension.
DrawingsDirect draws double storey side and rear extensions for full planning and building regulations, with structural calculations for the additional floor load and foundations produced in-house by our MCIAT-chartered team, on a fixed fee. If a single storey is enough, see our Rear Extension and Side Return Extension pages, or combine both with a Wraparound if you are extending sideways as well as up.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings across Tower Hamlets
Double Storey Extension Drawings in Tower Hamlets — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for an extension in Tower Hamlets?+
My Tower Hamlets property is listed — what consent do I need?+
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
How long does Tower Hamlets Council take to decide?+
How much do planning drawings cost in Tower Hamlets?+
Get your free Tower Hamlets planning assessment
Tell us your Tower Hamlets address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.