
Dormer Loft Conversion Drawings in Putney SW15
Fixed-fee, MCIAT-chartered dormer loft conversion drawings for Putney (SW15) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.
Putney (SW15) is unusually heavily conservation-controlled for an outer-inner London neighbourhood: five separate conservation areas — Putney Embankment, West Putney, East Putney, Charlwood Road & Lifford Street, and Oxford Road — cover a large share of the housing. Whether a property sits inside one of those boundaries is the single biggest factor in how an extension or loft is designed and assessed.
Add the Thames on the northern edge, and riverside and Embankment properties also carry flood-zone considerations that have to be addressed in the application. We map a Putney property against the conservation and flood-zone boundaries first, then design the drawings to Wandsworth's residential guidance so the application is validated without a query.


Planning in Putney (SW15): what to know before you apply
SW15 has no householder Article 4 direction, but its five conservation areas mean permitted development cannot be assumed across much of Putney, and riverside properties near the Embankment sit within the Thames flood zone — both are checked before we recommend a route.
Typical Putney housing stock
Victorian and Edwardian terraces on the streets climbing from the river, riverside mansion blocks along the Embankment, and interwar semi-detached houses toward Putney Heath and Roehampton.
Streets we regularly draw for in Putney
Putney High Street · Upper Richmond Road · Lower Richmond Road · Disraeli Road
Dormer Loft Conversion Drawings for Putney (SW15) homes: the package and the process
Every dormer loft conversion drawings we prepare for an Putney property is drawn to London Borough of Wandsworth’s validation standards and tuned to the SW15 constraints above. Here is what the drawing package covers and how the process runs from first survey to approval.
A dormer is the loft conversion most London homeowners picture first: a box-shaped or L-shaped addition built into the rear roof slope that turns a cramped loft void into a full-height bedroom or bathroom. Box dormers sit squarely on the main rear slope; L-shaped dormers link that main-roof dormer to a second one over the rear closet wing found on most Victorian and Edwardian terraces, roughly doubling the usable floor area for a similar planning risk.
DrawingsDirect draws both types for London roofs every week. Because the permitted development rules for dormers turn on volume, elevation and location as much as design, we check your eligibility for a Lawful Development Certificate before recommending a full planning application — and if your roof actually suits a hip-to-gable or mansard conversion better, we say so rather than drawing the wrong scheme.
Is a rear dormer loft conversion permitted development in London?
A single rear dormer is the loft conversion most likely to qualify as permitted development in London, provided it stays within the volume allowance — 40 cubic metres for terraced houses, 50 cubic metres for detached and semi-detached homes. The dormer must not extend beyond the highest part of the existing roof, should be set back from the eaves where practical, and is normally finished in materials that match the existing roof. Where the numbers work, we recommend a Lawful Development Certificate rather than a full planning application, because it is faster and gives you a legal record that the work was lawful.
Box dormer or L-shaped dormer — which suits a London terrace?
A box dormer is a simple flat-roofed addition set into the rear roof slope, adding headroom and floor area over the main roof void. An L-shaped dormer links that main-slope dormer to a second dormer over the rear closet wing — the small rear addition found on most Victorian and Edwardian London terraces — and is popular because it captures far more usable space over the stairwell for a similar planning risk. Both are generally assessed the same way for permitted development, but the closet-wing element of an L-shaped dormer needs its own structural support, which we detail on the drawings and coordinate with the structural calculations.
- Box dormer: single flat-roofed addition on the main rear slope
- L-shaped dormer: main-slope dormer combined with a closet-wing dormer
- Both are typically finished in matching brick, tile-hung or render to suit the host roof
| Dormer type | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Single rear box dormer | Permitted development / LDC | Standard joist and beam upgrade | £1,100 |
| L-shaped rear dormer | Permitted development / LDC | Additional closet-wing support | £1,300 |
| Front dormer | Householder planning | Standard joist and beam upgrade | £1,600 |
| Dormer in a conservation area | Householder planning | Standard joist and beam upgrade | £1,600 |
Dormer Loft Conversion Drawings in Putney SW15 — FAQs
How much do dormer loft conversion drawings cost in London?+
Is my dormer definitely permitted development?+
How long do dormer loft conversion drawings take?+
Will I need an architect for a dormer loft conversion?+
What if my roof suits a different loft conversion type?+
Do I need planning permission for a side-return extension in Wandsworth?+
What does Wandsworth's basement Article 4 direction mean for me?+
How long will Wandsworth take to decide my application?+
Can you design an extension for a converted flat near the commons?+
How much do Wandsworth planning drawings cost?+
Get your free Putney planning assessment
Tell us your Putney (SW15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.